Simple Universal Smartphone Stand V2 (Fixed and improved!)

Both versions print perfectly fine without supports (as long as you have adequate part cooling). However, this stand comes in two versions: One with the speaker hole, and one without it. Even though the standard V2 prints fine without supports, I added the version without the speaker hole since I know some of you will still try to avoid using models with bridges at all costs.

If the speaker hole doesn't line up with your phone or if you have an extra-thick phone case, feel free to edit and customize this at https://www.tinkercad.com/things/2Xx6NSr9pJo-universal-smartphone-stand.

If you have any issues, please comment below. I may not always reply, but I might see if I can fix your issue.

Inspired by iPhone 6 Side Holder (https://www.thingiverse.com/thing:980332) by SteveGnome. I did not mark it as a remix because I designed this from the ground up, however I got theidea from his design.

Fits 95% of phones, including but not limited to: iPhone 5 and newer, Galaxy S7 and newer, Oneplus 6 and newer, all Google Pixel phones and more

Images will be updated soon to show the new versions

Last update: 6/8/2021

Edits:

Added two holes for your speakers (Only in the standard V2)

Removed the vertical line between the base and the arm (Both Versions)

Angled top is now flush with the arm (Both Versions)

Print Settings

Printer:

Monoprice Select Mini V2

Rafts:

Supports:

No

Resolution:

Infill:

60% - 100%

Notes:

How I Designed This ===================

I used a digital caliber to measure several different phones including an iPhone 7, Oneplus 7 Pro, and an iPhone XR. I then averaged the dimensions and modeled a box which represents a phone using those averaged dimensions. Using the modeled phone, I modeled the stand and exported it as an STL.

The software used was Tinkercad.

Category: Mobile Phone