Draw Latch

With this remix, the awesome design by ConceivablyEngineering is made printable without needing to print it in place. Also, since the original broke, this remix uses M3 bolts as rotation axes to make the latches stronger.

I used M3x30 and M3x40 bolts. You can also use M3 threaded rods and cut them to length. No nuts are needed since the bolts are kept in place by using the friction from the undersized holes. The holes of the parts that rotate are not undersized so everything rotates smoothly.

I printed a couple of them in PLA and they do a perfect job of keeping my enclosure door closed.

Thank you ConceivablyEngineering for designing the original! It was exactly what I needed, but wanted to make it easier to make and stronger.