May 2, 2022
Description
Bottomcap for the Caperlan Travel 600 still fishing rod.
its got a vent hole in the bottom for water and air to escape while deploying or retracting the rod.
Feedback is appreciated!
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15
Filament: Goedis PETG Black
Notes:
i'd recommend petg over pla, pla works too, but its relatively brittle.
Also if you print at .1mm resolution, the threads will most likely fit a little better, but .2 works too.License:
Creative Commons — Attribution — Noncommercial
11
Sven
