May 2, 2022
Description
I scaled up the model by Exitaph to fit as two parts on a 200mmx200mm print bed, removed the bases, and fixed some errors in the mesh. I flattened some circles where the bases go to better line them up.
I remodeled the base and also modeled vehicles to be printable with a 0.4mm nozzle.
Make sure to print the following files:
1 x BG Left
1 x BG Right
1 x Pin Short
4 x Pin Long
2 x Base
2 x Banshee
2 x Warthog
2 x Ghost
2 x Scorpion
The short pin goes in the upper hole on the side with only two holes, the rest of the holes take the long pins.
Printer Brand:
Monoprice
Printer:
Maker Select
Rafts:
Yes
Supports:
No
Resolution:
.1
Infill:
10
Filament:
Generic PLA
Notes:
print the small vehicles in their colors (purple for ghost + banshee), light green for warthog, dark grey or black for scorpion, or paint them to match their colors.
Make sure to use a raft or slow your printer way down for the small vehicles, they are all about 3mm x 6mm, and have some delicate features.License:
Creative Commons — Attribution
CharlesAhrens
