May 9, 2023
Description
This is a cup holder insert for a 2021 Subaru Forester (and possibly other Subraru models too) that will fit a 32/40 oz hydroflask water bottle (or other similarly sized 91mm diameter water bottle) without blocking the other cup holder. The inner hole fits a standard 12 oz can or 16 oz soda bottle, up to a 73 mm diameter.
UPDATE 5/8/2023: Added fusion 360 files, and new versions (Boot L and Boot R) that should fit a hydroflask with a rubber boot. These have not been tested, as I got rear-ended last year and my Subaru was totaled. The cupholders didn't break though!
Print in PETG or ABS for better heat resistance in the warm sun. This doesn't need any supports if you're printer can handle ~50-60 degree overhangs.
The default model is for the drivers side cupholder, if you want the passenger side too, just mirror the print so that the corner nub is pointing to the opposite side (see the picture).
Printer Brand:
Monoprice
Printer:
Maker Select
Rafts:
No
Supports:
No
Resolution:
.3
Infill:
10
Filament: Overture PETG
Notes:
make sure to print in PETG or ABS to prevent warping in the sun. If you live in a colder climate, you can get away with PLA.
Category: Automotive
License:
Creative Commons — Attribution
8
CharlesAhrens
