May 2, 2022
Description
This is for ----Creality CR-8 / Afinibot A9 ----
This is a sensor holder for 18mm Inductive or Capacitive sensors.
The sensor holder is mounted under the 2 screws for the hotend shielding. You will need 2 screws 3x10mm to accommodate for the sensor holder.
Be careful to check that the bottom screw, does not interfere with the x-axis track.
See my other things HERE
Printer:
Creality CR-8
Rafts:
No
Supports:
Yes
Resolution:
0.20
Infill:
100
Notes:
I use 100% infill for stability
License:
Creative Commons — Attribution
7
Jubaz
