Hook and lever for additional spring for stick in ORX Orange T-Six transmitter - ver 0.9

It's an upgrade for my ORX T-Six transmitter Mode2 (bought on Hobby King).

Left stick was no spring loaded which I needed for my small RC cars (light controller was assigned here). So I found suitable 3 small rods (I cut them to proper length to fit properly inside the stick bracket) and I found in my spare parts some similar spring.

The flat part, the lever, might need some adjustment, because it's a first version.

I gently modified that part width sharp knife for better work with bottom part of the stick in the stick bracket.

And that's it.

It works now with my RC cars and Rx-43d-1 receiver with lights management.

Category: R/C Vehicles