Vase-mode Phone Holder for Round QI Puck

This is a two-part vase-mode phone stand with an indentation to hold a 70mm round QI charging puck.

It must be printed in vase-mode. I recommend printing at 0.3mm layer height with a 1.2mm bottom.

You will need to make sure that the inside part has the lip at the bottom and that the outside is printed with the opposite side down compared to the inside part.

I plan on filling mine with coarse sand for weight.

Print Settings

Printer:

Micromake D1

Rafts:

Supports:

Doesn't Matter

Resolution:

Infill:

NONE, use VASE-MODE

Notes:

How I Designed This ===================

This was created as a simple solid in Fusion 360.

Category: Mobile Phone