Vanmoof/Ortlieb Pannier Bag Wall Mount

A solution to mount unstable panniers to the wall and free up some room. I personally used an extra piece of wood to prevent having to drill 8 holes in the wall but it is not mandatory. I have not tested the mounts under load as I only use them to put the bags out of the way.

Also, I've only tested the mounts on my large panniers that are being sold by VanMoof. Please check dimensions I you are using a different brand. The small VanMoof pannier use a different mounting system. The side clips on the small VanMoof bags should fit the mounts.

The default width between the arms is 35mm and the pin is 10mm thick. I've included a stp file for further editing.

Printed in PETG at 0.3mm layer thickness and a wall thickness of 3.