May 3, 2022
Description
This is a remix from https://www.thingiverse.com/thing:3112141
It supports LED with cut separation of approx. 34mm and 17mm apart, the channel is 10mm wide, there is a space to slide the shields in, they are tight and bit hard to slide in, but they work. Not a lot of space, so you will need cut and solder the leds to make the corners.
Has support for using M3 screws if you want to secure it to the frame, I made custom T-Nut from the OpenSCAD from here: https://www.thingiverse.com/thing:3495698
Please post makes, it's nice to see the makes.
Printer:
Eryone Thinker S
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
20%
Filament:
Mech Solutions PETGBlack\White
Notes:
Should be fine with any material, just choose the PETG to match other printed parts.
License:
Creative Commons — Attribution — Noncommercial
7
dapostol73
