May 4, 2022
Description
This is an attempt to create a Custom LCD Enclosure for 12.1" LCD Screen from a Laptop. It was designed to hold the LCD Control board with small speaker. No place was setup for speakers as there are many types out there.It is Also design to house a battery pack to power the board with a hole placed for a switch and power socket to charge the battery pack that you install without disassembly.The power socket is a standard 3.5mm type. and battery pack is a 12 volt 8000mha found at EBay or Amazon. I customized the battery pack for this project. The LCD Control board I designed for is a M.NT68676.2 which has HDMI, DVI, VGA, and audio in/out ports on it and runs about $25.00 on Ebay. LCD Screen is a LTN121A10 model from an old Chromebook and can be found on Ebay for as little as $15.00.
I included the button wall and the port walls so it could be custom to your board. Link to Project page: https://www.tinkercad.com/#/?type=all&collection=projects&id=dmM4NFvqgNm
Sorry no pictures of semi finished project hence "Work in Progress" status.
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
40
Notes:
Caution had issues printing some parts due to adhesion problems. I used BRIM setting in CURA 15 to help.
Small Printer Assemibly
It Split to fit Small bed 220x220 so Gluing together is needed.
Simple Design using TinkerCAD online
Public Project is work in progress.
License:
Creative Commons — Attribution
10
JRiker9
