Shishiro Botan's mascot as a model you can print. I suggest using a resin printer over a FFF printer due to the tail's thickness.
Edit 4/6/22: Version 2.0
- The tale is thicker thicker
- Adjusted the angle for the fuse to reduce the amount of necessary supports
- Eyes are attached to the body much better and have been enlarged/extended to print better
Edit 4/28/22: Version 3.0
- adjusted the tail thickness again
- a supported version is available for anyone with resin printers or wish to not deal with manually adding supports
- supported version downsized to 50mm height to fit resin printer buildplates
Category: Animals
ShirayukiX
