Eye of agamotto

Remixed from Laci_Legath's Eye of agamotto

Changes

• Ran the models through OpenSCAD to fit my parts.  
• Added screw posts and holes. 
• Designed a new back plate to fit the battery holder.
• Designed a new jewel with a pentagram pattern.

There is also a peg for a pushbutton that I ended up not using.  I ran the math on the single LED and came up with ~2 weeks of battery life.

Hardware

• Hot Melt Inserts: Length 6mm, M3, OD 4.2mm
• Screws: M3 8mm
• 6V CR2032 Coin Cell Battery Holder
• 500 ohm resistor
• 3mm Green Breathing / Fading LED

Finishing

Started with a coat of sandable primer, then brushed on bronze paint.  Top coat is a wash of diluted black paint.

I used glazing spot putty (bondo) on the cage cover, then sanded smooth.