VESA LiftPod Parametrized Base Mount

I was inspired by SergeBakharev's mount. I needed one with a bump for the VESA mount indent in my monitor. Decided to parametrize it as each monitor might have different screw sizes.

The LiftPod mounting arms have the same spacing as in the original base plate. The design also includes the indents for locking washers which were missing in Serge's design.

You can customize such things as:

• VESA mount standard (100x100, 75x75)
• Diameter of screw holes
• Thickness of the mount plate (depends on the length of the mount screws you have)
• Distance from the mount plate to LiftPod arms

All feedback is appreciated. If you printed it please post a Make, I would love to see it!

If you want to see the project's code in an more organized fashion visit https://github.com/JGrzybowski/VesaLiftPod and leave a star if you liked my design.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

0.2

Infill:

Filament: Prusament PETG Chalky Blue Post-Printing =============

Sand down all the remains of the supports connection points.

Category: Camera