May 4, 2022
Description
Didn't want to carry a 12 mm hex socket with me to adjust the high speed compression on my EXT Storia rear shock.
This is a snug fit - model size for the hex is 12.15 mm, it slides on and stays on, I wouldn't keep it there permanently, but this is small enough to fit in any pocket.
Printed in PETG at 0.2 mm resolution with 4 perimeters. Print upside down (handle on the bed), then it needs no supports.
Category: Sport & OutdoorsLicense:
Creative Commons — Attribution — Noncommercial — NoDerivatives
11
That Engineering Guy
