May 4, 2022
Description
About that big!
this is a physical, feelable, measurement guide
when asked or visualising about 1-2 mm now you can feel it, flex it.
put a grip around 5cm or 10 not just a mark on a ruler
technically it is accurate 1mm mark on one side 0.5 on the other but seriously use a calliper.
part of the "seemed a good idea at the time" range.
Printer:
FLSUN Q5
Rafts:
No
Supports:
No
Resolution:
0.3 or less
Infill:
20%
Filament:
any plaany
Category: 3D Printer AccessoriesLicense:
Creative Commons — Attribution — Noncommercial
7
C4D3
