Universal E3D Hemera Part Cooling Duct v2.0 for 5015 Blower

BOM (Book Of Materials):

• 2x M3 nuts (for the fan)
• 3x M3x25mm screw
• 1x M3x6mm screw
• 3x M3 Washers (for the M3x25 screws - optional)

• 1x 5015 Blower fan

  Instructions manual : https://www.thingiverse.com/download:7569024

  If you dont know what Hemera is, go check out: https://e3d-online.com/e3d-hemera

  If you’ve printed this duct and like it, you can leave your feedback in the comment section or you could upload a photo in the “I made One” section, if none of the above then use the "TIP DESIGNER" button and leave a tip for a hot or cold beverage. You can also use the link: https://www.paypal.me/akoswonerth , if its easier for you. Thank you!

Print instructions

Category: 3D Printer Parts Print Settings

Printer: Geeetech A10 - Hemera

Rafts: Doesn't Matter

Supports: No

Resolution: 0.200

Infill: 25%

Filament: any PLA Cherry-Red