Ribbed Tissue Box

Aesthetically pleasing modern design can be quite expensive so why not print it yourself for less? This model was designed to be as easy to print and assemble as possible with a detailed instruction booklet in PDF form, no supports, and properly oriented STL files.

Glue is the only thing you will need for this project other than the printed parts.

I have other models with the same design on my profile if having matching set interests you.

Designed for a 220mmx220mmx300mm print bed.

This model will use a 13% of a roll of fillament at 15% infill with 1 wall but if you would like to make it more solid it will be 25% of a roll at 15% infill with 2 walls. The total print time at .2mm layer height and 15% infill is 27h 35m or about 1.1 days.