Chinstrap Connector for Quest 2 Elite Battery Strap

I got tired of the Q2 being so front heavy, even with a 10AH battery as a count weight, so I ordered a hard-hat chinstrap from Amazon and made a new plate for my battery mounting clips to attach it.

• If you want just the chinstrap functionality, you will need 2 M6x1 - 10mm screws. I use clear plastic ones from the internet.
• If you also want the battery holder functionality, you will need 4 M6x1 - 10mm and 2 M6x1 - 15mm screws.

For best results I do the following:

• Use at least 3 shells
• Use 0.2mm layer height to get good screw threads
• Run an M6x1 tap through the threaded parts
• Run an M6x1 die over the battery screw

Here is my original battery holder: Extra Battery/Counterweight Mount for Quest 2 Battery Strap by Jorg | Download free STL model | Printables.com