May 5, 2022
Description
This rail supports a 10mm wide LED strip a couple MM off the surface below. Many can be printed and joined together with a freeform 3D printing gun such as a 3Doodler or with a soldering iron.
Printer:
Flux 3DP
Rafts:
Yes
Supports:
Doesn't Matter
Resolution:
0.35
Infill:
No
Notes:
Print these oriented vertically for a flexible part that can withstand being stepped on. Make sure you have a solid raft and good adhesion. If possible, make sure your printer lifts the head clear of the pieces on each jump.
Note: If your printer vibrates a lot, you may be forced to print these flat instead of vertically.OnShape Doc: https://cad.onshape.com/documents/34acbdfaa8c42e51578d3738/w/ca4b518e48a190a7fb538c2a/e/ba76a921dea71e138397da76
License:
Creative Commons — Attribution
8
tiz.io
