NBN FTTC NCD wall mount bracket

N2

Yes

Print with the 2 hole side facing the bed, this requires supports for the (4) mounting screw pads.

Post-Printing

You will need M3 Tap and tap handle, Qty (2) M3 x 10mm long screws

Tap the 2 x Ø2.5mm holes to M3

In each tapped hole, install a 3mm x 10mm long button head, pan head or Countersunk screw and screw in until the screws hold the NCD securely. You could also use self-tapping screws.

The NCD has 2 x Keyhole slots on the rear for screws.

Secure the bracket to the wall using suitable fasteners for your application, I used 8Ga Pan head wood screws