April 28, 2019
Description
Easy pallet was made for fast and easy printing. Made with only 2 pieces, the pallet can be configured in many different ways. The snap fit planks make for easy assembly with no glue required. There are 8 total different pieces for 16 possible pallet configurations. The wood filament makes the snaps weak if not pressed linearly. If strength is needed just scale, the clearances should still be right.
Any suggestions are welcome. Happy printing
The wood filament I used was very stringy. The snaps may need to be cleaned up with a knife. Also if you want the pallet to stay together, leave a small amount of the string blob on the snap. The snap will usually break before it comes back out.
License:
Creative Commons — Attribution — Noncommercial
6
think3dprint
