May 5, 2022
Description
A simple print to allow the use of a 40mm radial fan with a Satsana cooling duct instead of the stock blower. (Eg a fan that is quieter than the stock blower fan)
It uses the stock mounting screws and can be retrofitted to existing Satsana ducts/interchanged with the stock blower fan without needing to reprint the whole mount.
Make sure the 40mm fan you use can provide sufficient airflow to provide adequate cooling of parts as they print.
No supports are needed to print this if you orientate it with the completely flat side towards the bed.
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.12
Infill:
20%
Filament: SUNLU PLA Black
Category: 3D Printer PartsLicense:
Creative Commons — Attribution — Noncommercial — Share Alike
7
hairyfacedhooman
