remix of modular esk8 battery enclosure by toughook

A modular electric skateboard battery and vesc enclosure. Suitable for flat packed battery packs. Can be arranged in multiple ways, such as 5, 7 or 3 piece arrangements for different length decks. Standard design was intended for 40" longboard deck with slight concave, but not drop through. Overall length of 5 sections (2x END, 2x EXT & 1x MID) is 600mm. It is 200mm wide, with 42mm internal clearance. Using a neoprene seal on the perimeter will increase internal clearance, or you could extrude the walls to your desired height.

It is not supposed to be waterproof, but you could use strong PVC tape on the underside to create a seal (of sorts) between the printable sections.

Best to print with 100% infill (for strength), and with the sections in vertical plane (for best finish).

Free to use and share, just please do not remove the internal Toughook Logo, or design credit (Thanks).

(The above is a direct copy-paste of the original creator's original description. I simply chopped the STLs in half and added an extra 20mm of wall height.)

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Infill:

100

Category: DIY