Baby Yoda (Grogu) Ring

This is a baby Yoda/Grogu ring in U.S. sizes 4-16 in half size increments.

These rings probably only work with SLA/resin printers. I doubt they would work well on filament printers since they generally don't have the precision needed. Maybe with a really well dialed in machine, a small nozzle, low layer heights and taking it slow. Let us know if you get a good result with filament.

You can take a fine brush and model paint to color in his eyes and ears. Spray with clear lacquer to seal the paint and resin.

Not sure about your ring size? Here is a ring sizer that worked for me.

Ring sizes

Here is a chart to convert from U.S. ring sizes to metric for our friends outside the U.S.

Print Settings

Printer: Elegoo Mars 2 Pro

Supports: Yes

Resolution: 0.05 (50μm)

Material: ABS like resin, green

Note:

I printed these in ABS like resin on a SLA printer.

There is a possibility that even cured resin shouldn't be in contact with skin for long periods of time. Seal it with a clear coat to reduce this possibility.