Brembo Racing Brakes extruder visualizer

Do you like print like in a race? Then you will need a good brake (just joking).

How to print it?

- Can be printed with 0.4mm or 0.25mm nozzle, I recommend to use the 0.25mm in order to increase the quality of the letters on the brake calipers.
- There is no need to use MMU because the color change is made by different heights.
- I recommend to use the 3mf so all the color changes and supports are already defined, just slice, print and enjoy

What you will need to make this marvelous extruder visualizer?

- 1x Magnet 4x8mm
- A little bit of super glue

How to assemble it?

- Glue together the brake calipers and fit them in the mount aligning the two holes, you can use a little piece of filament to fit them together. See the photos.

I took the mount from here https://www.printables.com/es/model/189922-the-real-bondtech-gears-visualizer and modified to fit the calipers.

Hope you like it!