HP Monitor to VESA Adapter

Summary:

This is a variation of the HP Omen to VESA adapter provided by Technius with added gussets and tapering for strength. Two STLs provided:

• HP Omen monitor (slightly modified from original)
• HP M27FQ monitor (heavily modified from original)

---

Update 2021-09-07:

The M27FQ is very different from the Omen. I've created a new SCAD file with updates to the connector to work with the M27FQ. The monitor clicks perfectly into mount, and there's plenty of strength in the adapter to allow push and pulling and readjusting of the monitor arms. There is a bit of wobble with these mounts, but slipping in a bit of foam (from the original wrapping around the monitor) fixes the issue.

Update 2021-09-05:

Turns out it doesn't fit the M27FQ. However, for those who do have an Omen monitor, the gussets do add an enormous amount of strength, and the additional tapering I added to backplate make for a VERY strong mount.

Printed with:

• 5 perimeters
• 5 top layers
• 5 bottom layers
• 20% infill

Will provide additional updates once i have a variation that works for the M27FQ.

Original Post

This is a variation of the HP Omen to VESA adapter provided by Technius with added gussets for strength. The HP Omen apparently has the same mounting design as the HP M27FQ.

Note that this is a work in progress... I'll update it once i've printed and confirmed it's working.

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

200

Infill:

Filament: Monoprice PLA+

Notes:

Category: Computer