Motorola Moto E20 xt2155 case

Originally published here: (WIP) Motorola Moto E20 xt2155 case by tato_713 - Thingiverse

This was designed for the Motorola E20, but it may be compatible with the E40 as well. Some of the models are designed for rigid materials and others for flexible ones. The models' materials are not interchangeable, so pay attention to the file names. If you have any request on the design just ask me.

For other phone cases check this.

Here is the explanation of the files names:

• Flex: made for elastic filaments like TPU. Not tested.
• Rigid: made for rigid (non-elastic) filaments like PLA, ABS, HIPS, etc. The entire model is a little bigger and the holes for the buttons are opened on the front side. Tested only on PETG. 
• Banded: It has regular horizontal grooves in the bed surface, to make the finished texture more regular, avoiding irregularities on that part, and bringing it a better grip.
• Aired: It is widely opened in the back so that the phone can dissipate the heat easily.

I spend part of my time making these models, letting them available and free for everyone. If you want to support my work you can buy me a coffee in Ko-fi:



Si estás en Argentina podés invitarme a un cafecito:

References

• GSMArena