May 7, 2022
Description
I wanted to add some color to my screen housing so I made this in Tinkercad. You can simply drop it in place or do what I did and use a couple thin strings of blue sticky tack along the bottom of the flat outer frame. I purposely designed it to have a slight bit of wiggle room (<0.2mm) so you should not have to make any post-print adjustments.
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.20mm
Infill:
100
Filament: Eurekatec.ca PLA Peacock Blue
Notes:
I suggest 3 walls or less for a nice surface finish pattern on the first layer/skin.
License:
Creative Commons — Attribution
7
rf1989
