Voron Mellow FLY-SHT42 Holder LGX/Nema17 Canbus Cable holder

FLYSHT42 / Nema17/LGX Mod

for a Voron 2.4 using LGX or nema17. Will fit 10mm OD cable, fit in place with 2 cable ties.

2 Versions, If you are using the default Z chains at the back of the printer please use the Thin version and print with at least 50% Infill with ABS, This is because there is a PCB that sticks out the back of the board, this has a chance of rubing on the chain so the thinner version is needed to allow clearance when homing.

If you removed your cable chain at the back of the printer and using a cord style design, Go ahead and print the thicker version. You can also use spaces in-between the mount to help reduce heat on the FLYSHT board if you would like.