You can print this cutter to use for private use or to print and sell for commercial use.
If you share this cutter pack with anyone then you must share it in it's entirety including this infographic.
This Pack contains a cutter designed by Utterly Cutterly of 50mm at it's longest point. There are 2 cutting edge variations, 0.7mm and a 0.4 cutting edge with 1mm support wall.
Test print settings: Cura 5. thin walls enabled, 0.4mm nozzle, initial layer print speed 20mms and rest of print speed 40mms. Printed on an Ender 3 Pro.
As a detailed cutter, we recommend using cornstarch to have clean cuts and embossing.
Cutter is 12mm tall, 3mm wide and thick base, debossing is height of 10.5mm so works on clay thicknesses more than 1.5mm.
UtterlyCutterly
