Longboard Steering Stick System

A little project I built by myself for university.

This is a prototype, drivable but not safe!

If you want to make one, you may have to reconstruct or modify some parts because I designed it especially for this "globe" longboard.

In addition to the printed parts you need:

2x steel plates with additional cutouts

1x 12mm riserpad for the rear trunk

1x steering stick of a kickboard (no matter if fold-able or not)

1x aluminium or metal tube (bicycle handlebar), outer diameter 22mm

2x metal strips 60x15x1mm with two 6,5mm holes in a distance of 40mm

Screws and nuts:

1x M10 allen bolt, head is grinded down to a heigth of 3mm

1x M10 self-locking nut

4x M6 screws to hold the metal strips

4x M6 distance nuts 30mm height

4x M6 countersunk screws long

4x M6 countersunk screws short

4x M6 nuts

Category: Hobby