May 8, 2022
Description
This is a hotend / extruder cable bundle holder with a separate slot to hold a fish tape. I designed it to mount under the top 2020 frame on my X5 and stick out enough on top to get to the screws. So far it works much better than the zip ties etc I was using before. In the pictures you can see the fish tape in its own slot and the 2.85mm nylon filament I also used to support the bundle in with the cables. It uses 4 m3x20 screws and 4 m3 nuts to clamp together and I used 2 m4x10 screws with T nuts to mount it on the 2020 extrusion.
Category: 3D Printer PartsLicense:
Creative Commons — Attribution — Share Alike
7
Ctowns5
