Fixed forward grip for rifle NATO rail

For personal improvement in gun control, this is a fixed forward grip for mounting on a rifle's lower NATO rail, tilted, with finger grooves and a secret compartment.  It's not particularly strong, favoring form over function, but is adequate for target range use.  It needs two 3mm (or similar) screws and nuts for mounting on a pic rail.

The orientation shown in the pictures for table placement is suggested as it will afford the greatest strength versus layer-on-layer adhesion.

I don't recommend this grip for normal every-day (or stand-by defense) use as it is too weak even when printed in strong plastic… it does not have the strength to stand up to rough treatment and will break off, but it's completely adequate for making a target-practice rifle easier to handle for a clumsy person (me!).  I'm also mounting this particular printed model on a Hi-Point 9mm PCC rifle, which is rather robust and much less likely to break than the grip.

There is a small compartment on the bottom of the grip for a Hi-Point gun key, the bottom cover must be loosened with a craft knife before use.  There is an extra dent on the right side for the author's bent left pinky finger.  Sorry, but that's necessary.

Happy shooting and be safe!  Everybody OK!