Filament spool shaft (hygrometer, desiccant)

I wanted to put a desiccant and hygrometer on the filament, so I tried a few things to put it all together.

・Compatible with spool holes of 35 mm or more in diameter and 65 mm or less.

・By inserting a short PTFE tube at the bottom of the filament spool shaft, the spool rotates smoothly in a sealed container while remaining horizontal.

(If there's a tangle of filaments, it will get caught.)

・Drill a hole in a Japanese pickle sealing container and use a glue gun to secure the PTFE tube as a filament guide.

・Place the filament spool horizontally in the container and feed the filament to the 3D printer.

We were able to make a good one by using many designs as a reference.

I would like to take this opportunity to thank you.

Thank you.

I pray that I can be of service to you.

The design that was used as a reference

Universal Filament Spool Holder https://www.thingiverse.com/thing:2070272

Inside Spool Desiccant Holder https://www.thingiverse.com/thing:3339561

Cheap and easy filament storage and filament supply box with cap https://www.thingiverse.com/thing:3062164

※こちらと同様の容器が入手できない時期があり、代わりに以下の勾配のついた容器を利用するためにデザインしました…

Japanese pickle sealing container

トンボ 漬物 シール容器 浅4型 保存容器 https://www.amazon.co.jp/gp/product/B001UJMMZQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Digital thermo-hygrometer

Search for "B07V3MHVK5" on Amazon.

デジタル温湿度計 Amazonで「B07V3MHVK5」で検索してください。

Print Settings

Printer:

Geeetech i3 Pro B

Rafts:

Supports:

No

Resolution:

Infill:

25%

Filament:

Other PLA

GLAY,BLUE

Category: 3D Printer Accessories