3D Printing Trophy: Warping and Splitting

Another in my series for makers to earn achievements for their dedication to 3D printing.

Model prints with 10% infill.  Optional panels are included if you want to print brown/wood covers for the model base.

Supports are recommended.  My settings were to print this with support density of 0% so that only the top and bottom support interface layers printed.  This filled the splits and then I uses a razor blade to remove the interface layer supports.

This trophy is earned when your model warps or splits. You don’t know what temperature you should have had the air or the plate, but it wasn’t this.

Enjoy!