January 3, 2023
Description
Just a simple fibre LED lamp. I glued in 4 led strips and soldered two lines in parallel, to have the ends of the fibre in the same light. The holes are perfect for a strip with 60 leds/m.
The model has to be separated in slicer. It can be printed without supports
I used 2m of 3mm fibre optic cable side glow, but it depends on how the fibres are arranged.
The pcb is a simple design i've made, but it is also possible to soldere it directly to the d1mini.
Fibre-Optic-Wire:
2 Meter 3,0mm LWL Lichtwellenleiter Lichtleiter Glasfaserkabel Lichtf (modellbau-schoenwitz.de)
PCB can be found here:
mazls/desklamp_pcb: PCB for my lamps (github.com)
For the programm you can use WLED.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Mazls92
