May 10, 2022
Description
After switching to 4mm push-connects for filament routing, I hated having to press the tube in and out of the orange adapters seen in the OG top plate. You can thread the connectors right in and strain relieve the cables at the top.
Printer:
Qidi Tech 1
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2
Infill:
20% or greater
Filament:
Generic ABS or Higher TempAny
Notes:
Steppers can get a little hot during long prints, so higher melt temp mat'ls are best.
License:
Creative Commons — Attribution
7
Creative-Extension11
