August 27, 2022
Description
I was quite surprised how this was over looked, but its a super easy fix :D
This upgrade is dubbed R1.1, until PRUSA send me some free PRUSAMENT filament and incorporate this into the final design :D
There is an issue that the extruder fowls on the Z axis top, however this is not the true end stop of the PRUSA MINI+
This little Update removes material from the assembly to allow clearance, which in turn gives you more Z axis height!
This is based on the results from
https://www.printables.com/model/179537-prusa-mini-z-axis-extra-height-adaptor
No Additional hardware required,
Can print in draft 0.25mm (standard settings)
0.4mm nozzle,
20-100% in fill
Printed in PLA+, can use PETG also to match
License:
Creative Commons — Public Domain
7
seifer69er
