W203 License Plate Light Housing

W203 C200 License Plate Light Housing, modelled to stock dimensions.

Part no : 203-820-0556-64-OR or A203820055664

You will need the stock screws & festoon bulb holder prongs. Some insulation tape could also be used on the back.

I've also included the .step file. Inside said file, I modelled the festoon prongs, they seem to made from stainless steel sheet metal and serve to both hold the 36mm festoon bulb & as connector pins. I think it's possible to remake them.

If you want to alter the design; to fit threaded inserts or other festoon bulb holders (not sure how to wire to the connector then..) feel free to do so :)

Update - 23/1/22

• Changed center-to-center distance of the lens screws from 47.5mm to 49mm
• Removed screw holes countersink, changed to straight 3mm hole
• Redesigned the connector & left side ribs to the correct dimensions
• Increased the right side latch mechanism's thickness
• Added .step file, which contains the housing + festoon bulb holder prongs

Print Settings

Rafts:

Doesn't Matter

Supports: 

Yes, Concentric

Resolution:

0.2mm

Infill: 

20-30%