May 11, 2022
Description
Joiners for the Magnetic Shields for the LaserPecker laser units as sold by LaserPecker.
The joiners allow to stack the shields one above the other and can be placed around the LaserPecker units to provide extra height protection.
The acrylic of the shields is approximately 2.63mm thick and the joiners are designed as appropriately.
Two are recommended per shield.
Material: Any / PLA
Layer Height: Any / 0.3mm
Infill: Any but 15%+ recommended
License:
Creative Commons — Attribution — Noncommercial — Share Alike
10
Michael Atkinson
