August 23, 2022
Description
Caibrate your delta printer's tower angles and radius errors with this test piece. A modified version of https://www.thingiverse.com/thing:745523 , it is best for use with Repetier firmware where the tower angles are measured from the X axis.
Test piece is 150mm diameter.
Print angles.pdf and line up the center of the print and the V slot with the X axis. Measure the angle errors of the towers. Tower lines are 120º apart. Each smaller graduation is 1º.
Radius errors can be made by measuring the outside of the blocks (67mm base length).
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
boksbox
