CTC Bizer / Makerbot X-Axis Carriage for E3D-V6 Hotend

After upgrading mit CTC to the E3D-V6 hotend using X-Axis Carriage designs, I found here on Thingiverse, I wanted to be able to see the nozzle with my webcam during printing. Furthermore I wanted to have 2 cooling fans on the side to improve cooling. So this is the design I came up with.

The filament guide is designed for a 6mm PTFE tube. The extra space between the end of the tube and the filament drive block is for easy accessibility during filament loading or unloading.

You will need:

Screws DIN 912:

-M2 x 12: 2 pcs

-M2 x 20: 4 pcs

-M3 x 16: 4 pcs

-M3 x 20: 4 pcs

Nuts:

-M2: 6 pcs

-M3: 4 pcs

Misc:

-4010 cooling fan: 2 pcs

-cable ties: 2 pcs

-In my case, the X-belt was too short to fit in the mounting bracket, so I purchased a longer one

Print Settings

Printer:

CTC Bizer Dual

Rafts:

Supports:

Yes

Resolution:

Filament: ERYONE PETG

Category: 3D Printer Parts