Warp Core lamp over 5 foot

Update 9/19/2020 floor base had floating parts that I had missed file was corrected and renamed floorbasefixed. Thank you Wmcmillenjr for pointing that out.

If you make this please post a make I would love to see those that others have done.

UPDATE 2/2/2020 basic instructions pdf now in files.

this is large so I designed it to use as little material as possible and no supports. some things were sliced apart for easier prep and paint.

I did 3 runs of LEDs on both the top and bottom PVC sections use as many as you wish but the more you use the bigger the usb power port will need to be.

Recommend large infill for very bottom and top caps.

instructions and additional parts list to follow

will require a big printer

additional parts required

5/16 wood dowel

3/4 inch PVC pipe

(2) 12v USB charging 3 port

(1) 12v single port usb charging adapter at least 2 amp to power light controller

led lights

12v power supply

12 foot extension cord

https://www.amazon.com/Bralon-Charger-2-Pack-Identification-iPhone/dp/B075CJMJYJ/ref=sr_1_1?keywords=bralon+usb&qid=1579816469&sr=8-1

https://www.amazon.com/Powered-Controlled-Waterproof-Changing-Bluetooth/dp/B07JZZVHK8/ref=sr_1_7?keywords=xyop+strip+lights&qid=1579816392&sr=8-7

https://www.amazon.com/BINZET-Adapter-Converter-Regulator-Flexible/dp/B00Z9X4GLW/ref=sr_1_4?crid=3C236Y388MA91&keywords=10+amp+12v+power+supply&qid=1579816052&sprefix=10+amp+12v%2Caps%2C635&sr=8-4

https://youtube.com/shorts/ZSyEnIxcVA4?feature=share

https://youtube.com/shorts/ZSyEnIxcVA4?feature=share

https://youtube.com/shorts/ZSyEnIxcVA4?feature=share

Category: 3D Printing