February 4, 2020
Description
I just designed a simple mount for a cable drag chain for my Vulcanus V1 (2016) an thought someone may like to use it as well. The part on the x-carriage (2016 Version!) is glued on to with acetone - the part on the back is mounted with 2 M3 screws and M3 square nuts. If you modify the part that goes on the x carriage you should be able to adept the part to most 3d printers.
The mount is designed for a 20x10mm drag chain, I just ordered this one:
http://www.aliexpress.com/snapshot/7852889247.html?spm=2114.13010608.0.53.AkDCg8&orderId=76585111359057
I also uploaded the .stp files, so you can edit the model, if you are planing to use a different drag chain
Category: 3D Printer Parts
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
MacNite
