May 13, 2022
Description
This is a simple, good looking SD card holder with room for 5 full size SD cards and 2 micro-SD cards. The lid screws on and off easily with the addition of ridges along both halves for a better grip. The model has integrated holes for a lanyard, so the holder can be secured to a backpack or keychain. The lid of the holder has room for 2 mm felt padding to reduce rattling inside the holder.
Printer:
Custom
Rafts:
No
Supports:
No
Resolution:
0.4 mm nozzle at 0.2 mm layers, 3 perimiters
Infill:
20%
Filament:
3DE PETGRed
Notes:
The thread requires a printer with fairly good tolerances, and no larger than a 0.5 mm nozzle is recommended.
License:
Creative Commons — Attribution — Noncommercial
peterkrull
