LowRider 3 CNC

Updated LowRider CNC v4, here, https://www.printables.com/model/1034840-lowrider-4-cnc

This is a full sheet capable CNC router.

Size is up to you within reason, tool you use, control board, firmware, and end use is also up to you. I am doing my best to provide an inexpensive and flexible platform for people to use for their specific needs.

I do believe most can buy from the V1 Store or self source and pretty easily keep the entire build under $800 USD. Far less if you have a 3D printer, or CNC at your disposal.

All the details, lists, and instructions can be found here,  https://docs.v1e.com/lowrider/

Looking at about 2.2kg for a full sheet build's worth or prints, any rigid filament will work, but PLA is recommended.

Licensing info can be found here, https://www.v1e.com/pages/trademark-and-file-licenses .

 Changelog-

4/12/23 - ZStop Parts updated to V1. The new parts fit the endstops a bit better.

9/17/22 - Minor update to YZ plate DXF's, easier assembly with access to brace screws now, Z endstop adjustment. Files changed -YZ plate DXF v1.dxf,  YZ plate DXF v1 Mirrored.dxf