Nano Tool - quick swap hotend for 3D printers

This is the Nano Tool I use in my CorEssentials 3D printer. You can find the most current files on the GITHUB-Page:

https://github.com/MacNite/CorEssentials

There are 3 different kinds of tools available:

• Nano Tool Bowden (Coldend: 1x MF25101V1, Part Cooling: 2x UnitedPro 3510)
• Nano Tool Zesty Nimble (Coldend: 1x MF25101V1, Part Cooling: 2x UnitedPro 3510)

• Chimera Aqua Tool (Coldend: Alphacool Eisbaer Solo, Part Cooling: generic 4010 Blower)
  Most of the tools are available with markings for the nozzle size (i.e. 040 for a 0.4mm Nozzle).

  All these tools are desinged to work in the passivly heated chamber of the CorEssentials. I have tested them successfully for ambient temperatures of up to 55°C. I would not go much higher with chamber temperature on my printer because I printed the parts I use for the printer from ABS.

Print instructions

Category: 3D Printer Parts