Lithophane Stand Light Box LED

This is a lithophane light box that I designed in order to use flexible LED strip lights as the lighting source. The inside of the box has channels for routing the lights to get even back lighting on your lithophane. I add a few drops of super glue in addition to the adhesive tape on the lights to make sure they stay in place over time.

The cord relief is a press fit into the back and helps prevent the lights getting stressed if the cord is pulled on. The lithophane fits into the frame tightly as there are 2 small bumps at the bottom to hold it in place.

Lithophanes created using Flat Lithophane Maker
https://lithophanemaker.com/Framed%20Lithophane.html
Width=120
Height=160
Depth=7.5

A couple lights I have used:

https://www.amazon.com/gp/product/B07T489JHF/ref=ppx\_yo\_dt\_b\_asin\_title\_o03\_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B015JV9QJK/ref=ppx\_yo\_dt\_b\_asin\_title\_o03\_s01?ie=UTF8&psc=1

Print instructions

Unassociated tags: light box, lithophane box

Category: Art Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: No

Supports: No

Resolution: 0.2

Infill: 15$

Filament: E-Sun PLA+ Black
Notes:

I used 3 perimeters to help prevent light showing through, depending on the filament color.