World of Warcraft Alliance Crest Coaster

Design notes:

1. The tolerances were 0.2mm. It's a little too much on the tiny pieces and not enough on the big/complex parts.
2. Included are the SVGs I used and the F3D for Fusion 360. Go wild with it. I'd appreciate credit for putting it together, but it's Blizzard's design, so I don't have a ton of claim. :)

Printing tips:

Print the shield as is. If the lion face bits are trouble, print them on a raft. If the details are hard, use 0.2mm nozzle, not typical 0.4mm.

Assembly

Glue together with super glue. I recommend tweezers, too.

https://www.twitter.com/mooklepticon

Category: Kitchen & Dining